Studer 369 Console For Sale
Shipping from South America – contact us for more info
Studer 369 Mixing Console #161 (c.1981) – 16-Channel, ex-Radio Universidad de Chile
Studer 369 serial no. 161, built in Regensdorf, Switzerland, c.1981. Fewer than 200 were made. The 369 uses the same modules as the Studer 169, with fully discrete, transformer-balanced mic preamps and 3-band EQ.
This console was originally installed in the recording studio of Radio Universidad de Chile, Santiago. It was in use for around ten years, then replaced and kept in storage, unused, for more than 15 years.
Configuration
- 16 input modules: mic/line with EQ
- 16 input bus units: group 1–8 and aux 1–2 assignment, PF/AF selectable
- 6 group modules, each with limiter, line output and additional high-level input (positions 7 and 8 empty)
- 8 group bus units: level, pan and aux 1–2 sends
- 2 master modules, each with limiter and additional high-level input
- 4 aux master units: Foldback, Reverb, Aux 1, Aux 2, each with VU meter
- 2 dual line amplifiers for the 4 aux sends
- Control room monitoring: monitor selector and aux selector
- Studio monitoring: monitor selector and aux selector
- Talkback unit
- 10 peak programme meters and 10 gain-reduction meters (8 groups and 2 masters)
- Correlation meter
- Test oscillator with bus connection unit
- 2 Studer 1.915.100 power supplies and a 24V stabiliser
- Patchbay under the armrest
- XLR inputs and outputs on the rear, with multipin tape connections
Condition
Sold as seen. The console powers up and passes audio on most channels. It needs a full service, recap and calibration. Some pots and switches are noisy, and there is noise at the group stage.
Last maintenance was in 2018 (cleaning, some re-soldering and fuse replacement). It has never been recapped.
Two channel faders are missing, and four faders are missing their stems and caps. The two group modules for positions 7 and 8 are not included.
There is general cosmetic wear, including the armrest covering.
Includes
Original manuals, including the service manual with schematics.
The steel stand shown in the photos is not original and is not included.
Specifications
- Dimensions: 1400 x 700 x 547 mm (W x D x H)
- Weight: approx. 100 kg
- Power: 100–240V, 50/60Hz, 380VA







